12-03-2021, 04:50 PM
Then back to cabinet work.
[Image: https://live.staticflickr.com/65535/4982...88b4_c.jpg]
[Image: https://live.staticflickr.com/65535/4982...2001_c.jpg]
I used heat to mechanically replate brass on the swivel arms.
[Image: https://live.staticflickr.com/65535/4982...60d6_c.jpg]
Here's where I'm currently at. What's left is to fix up the clock mechanism and reassemble.
[Image: https://live.staticflickr.com/65535/4982...3581_c.jpg]
A slight improvement I'd say
[Image: https://live.staticflickr.com/925/430305...1b63_c.jpg]
[Image: https://live.staticflickr.com/65535/4982...88b4_c.jpg]
[Image: https://live.staticflickr.com/65535/4982...2001_c.jpg]
I used heat to mechanically replate brass on the swivel arms.
[Image: https://live.staticflickr.com/65535/4982...60d6_c.jpg]
Here's where I'm currently at. What's left is to fix up the clock mechanism and reassemble.
[Image: https://live.staticflickr.com/65535/4982...3581_c.jpg]
A slight improvement I'd say
[Image: https://live.staticflickr.com/925/430305...1b63_c.jpg]