1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Test Equipment
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Linear Mode
Frequency Counter on a 38-116
quick573
Junior Member
**
Posts: 13
Threads: 3
Joined: Dec 2020
City: Pompton Lakes State, Province, Country: NJ
#11

01-01-2022, 12:42 PM
I get a sine wave on the scope. The higher the frequency the tighter the display which is good. On the top band however. the amplitude of the display is very, very low. Also on that band there is almost no background noise. I can barley hear only one station. Any ideas what's going on or should I say not going on. New caps, tubes and band switch cleaned with deoxit. And Happy New Year!
Find
« Next Oldest | Next Newest »


Messages In This Thread
Frequency Counter on a 38-116 - by quick573 - 12-26-2021, 06:42 PM
RE: Frequency Counter on a 38-116 - by quick573 - 12-27-2021, 11:28 AM
RE: Frequency Counter on a 38-116 - by quick573 - 12-27-2021, 03:23 PM
RE: Frequency Counter on a 38-116 - by quick573 - 12-28-2021, 02:13 PM
RE: Frequency Counter on a 38-116 - by Greg - 12-28-2021, 05:03 PM
RE: Frequency Counter on a 38-116 - by quick573 - 12-28-2021, 08:01 PM
RE: Frequency Counter on a 38-116 - by Mondial - 12-28-2021, 09:03 PM
RE: Frequency Counter on a 38-116 - by quick573 - 12-29-2021, 08:44 AM
RE: Frequency Counter on a 38-116 - by quick573 - 01-01-2022, 12:42 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM
Philco 38-7 Speaker
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM
Philco 38-7 Speaker
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM

[-]
Who's Online
There are currently 2520 online users. [Complete List]
» 1 Member(s) | 2519 Guest(s)
Avatar

>
  1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Test Equipment