Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Where to now?
#1

After taking a deep dive into old radio programs in the early 1970's I picked up a Philco 41-608P console. Recapped and aligned it. I replaced the original turntable with a Sony TC250  tape deck and wired it into the phono input. I was able to acquire some 7 1/2 inch reels of old radio programs through trades I made in the Indiana Radio Club. Spent many enjoyable hours listening to the programs from my youth on my old radio.
Fast forward 40-45 years, I've still got it and the tapes of the old radio programs. Still works perfectly. I still enjoy old radio programs. Meanwhile technology has marched right past me.......
Old radio programs are now available through the internet. Good ones, bad ones and some in between. I can even listen to them while driving in my car (Sirius XM and spotify)
So my question - what do I do with a fully operational 1941 Philco radio with a tape deck and a bunch of tapes of old radio programs that I've listened to many times? Is this just another artifact from the days of yesteryear? Do I just need to let go? I don't need it for AM radio (God forbid) or shortwave listening. Any ideas on how to incorporate today's availability of old time radio into an old Philco that was made the year before i was born?


Messages In This Thread
Where to now? - by astrotraveler - 01-02-2022, 10:01 PM
RE: Where to now? - by morzh - 01-02-2022, 10:55 PM
RE: Where to now? - by John Bartley - 01-03-2022, 08:24 AM
RE: Where to now? - by Radioroslyn - 01-03-2022, 08:38 AM
RE: Where to now? - by radiorich - 01-09-2022, 01:29 AM
RE: Where to now? - by astrotraveler - 01-09-2022, 10:14 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 3509 online users. [Complete List]
» 2 Member(s) | 3507 Guest(s)
AvatarAvatar

>