02-03-2022, 06:22 PM
Ok, you have square shields, same as mine, thats the last Run, there is no resistor #22.
The 39K resistor I had to replace with a 2W because it got hot.
You need to be using the last schematic on this page:
https://philcoradio.com/library/index.ph...-model-60/
DO NOT use any of the previous schematics.
Also a couple of the bakelite caps changed too.
Also capacitor can #20 should have 4 wires coming out of it NOT 5 if it is Run 7.
The 39K resistor I had to replace with a 2W because it got hot.
You need to be using the last schematic on this page:
https://philcoradio.com/library/index.ph...-model-60/
DO NOT use any of the previous schematics.
Also a couple of the bakelite caps changed too.
Also capacitor can #20 should have 4 wires coming out of it NOT 5 if it is Run 7.