[TV MAN]

Another snow day! I spent the afternoon working on the PC board. They had it labeled clearly with the value of each part. I only wish they had the part location related to the schematic, such as "C1, R22, V1 etc. This part went pretty good. It was straightforward and simple. As in a previous build, I used a small box labeled with each part, then stuck the wires in the cardboard as shown. This idea was picked up from an old Heathkit manual.


   



Started with the resistors. I checked each one before I installed.

   


Next I put the Electrolytics, then the smaller caps.

   


This one was a little harder to locate, It's a 100pf disk and I had to hunt to find its location.