Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Another save - a Philco 655B
#11

Ron Ramirez Wrote:Thanks, everyone! Icon_biggrin

Arran and Bill: I use Krylon Satin Nickel spray paint. It looks more authentic than that gaudy aluminum paint some people use. And, an additional benefit: It is conductive, which is a good thing, especially for tube shields; it helps ensure that the tube shields will still function properly.

I'm guilty of that, I used to use it because there wasn't anything else, just silver which is even more gaudy then aluminum. I think that when they were new the plating on some chassis was almost like aluminum paint in terms of brightness, but 60-70 years on it doesn't look quite right to be original. If you really want to go to town, and dismantle the whole chassis, you can get a chassis replated in cadmium, it isn't nearly as expensive as chrome since there is little to no polishing involved. On most sets it isn't worth the effort, but if you had something rare or high end that you wanted to bring back it could be worth it.
Regards
Arran


Messages In This Thread
Another save - a Philco 655B - by Ron Ramirez - 06-08-2011, 07:18 PM
Re: Another save - a Philco 655B - by Steve Davis - 06-08-2011, 09:11 PM
Re: Another save - a Philco 655B - by w4rtc - 06-08-2011, 10:18 PM
Re: Another save - a Philco 655B - by Arran - 06-08-2011, 11:39 PM
Re: Another save - a Philco 655B - by Uffda - 06-09-2011, 01:30 AM
Re: Another save - a Philco 655B - by BILL - 06-09-2011, 09:46 AM
Re: Another save - a Philco 655B - by Ron Ramirez - 06-09-2011, 09:56 AM
Re: Another save - a Philco 655B - by BILL - 06-09-2011, 10:13 AM
Re: Another save - a Philco 655B - by Ron Ramirez - 06-09-2011, 11:16 AM
Re: Another save - a Philco 655B - by Uffda - 06-09-2011, 01:59 PM
Re: Another save - a Philco 655B - by Arran - 06-10-2011, 12:30 AM
Re: Another save - a Philco 655B - by Arran - 06-10-2011, 12:33 AM
Re: Another save - a Philco 655B - by Uffda - 06-10-2011, 12:43 AM
Re: Another save - a Philco 655B - by etech - 06-10-2011, 09:55 AM
Re: Another save - a Philco 655B - by Ron Ramirez - 06-10-2011, 07:07 PM
Re: Another save - a Philco 655B - by Uffda - 06-10-2011, 07:49 PM
Re: Another save - a Philco 655B - by Ron Ramirez - 06-24-2011, 10:02 PM
Re: Another save - a Philco 655B - by Uffda - 06-24-2011, 10:56 PM
Re: Another save - a Philco 655B - by BDM - 12-21-2011, 12:16 PM
Re: Another save - a Philco 655B - by TA Forbes - 12-21-2011, 06:10 PM
Re: Another save - a Philco 655B - by magicclocks - 01-18-2012, 06:57 PM
Re: Another save - a Philco 655B - by Texasrocker - 01-18-2012, 09:19 PM



Users browsing this thread: 8 Guest(s)
[-]
Recent Posts
HiFi (Chifi) tube amp build - but my own design.
Tim Would mounting he transformer vertically change the hum, if used without additional parts? Also, in these amps...morzh — 02:25 PM
Shadow Meter Bulb
Gary I doubt it would introduce any noise. We use similar lamps for the panel indication, 12V AC lamps: they are LEDs...morzh — 02:15 PM
Shadow Meter Bulb
Not sure if anyone has tried this but there are 6.3 volt miniature lamps in bayonet and screw-in base options available ...GarySP — 11:31 AM
Shadow Meter Bulb
Any 6.3 volt pilot light will work. I would use the brightest one I could find in my workroom. Be sure the dial is clean...RodB — 10:45 AM
HiFi (Chifi) tube amp build - but my own design.
Tim, nice write up and thanks for sharing !! Sincerely Richardradiorich — 02:47 AM
HiFi (Chifi) tube amp build - but my own design.
Well, this was a real "Hum-Dinger" :lol: ! This will be kinda long, but hopefully it will help others having t...TV MAN — 01:55 AM
Shadow Meter Bulb
Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM
Philco 41-608 changer coupler
3D-printing...short of machining, of course. Or molding.morzh — 05:20 PM
Philco 41-608 changer coupler
Thanks, Morzh. That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM

[-]
Who's Online
There are currently no members online.

>