Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Predicta board lifted trace and trace corrosion.
#1

Hello i am new to this forum and a relatively newcomer to the hobby of tv repair so I work slowly but surely Icon_smile. I'm working on a Philco Continental with the 10L43a board.  Removed the board from the chassis and discovered this lifted trace under the Horizontal output tube as well as the corrosion on the B+ trace line. Both the lifted trace and corroded B+ test good for continuity. I will be replacing the Horizontal tube base. Looking for advice on how to re-attach the lifted trace and and deal with the green corrosion  Thank you        


Messages In This Thread



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1949 Motorola 5A9M
I've often wondered whether the capacitor foil adds to the inductance of the coil.RodB — 01:54 PM
Philco 42-345 Restoration/Repair
It helps to identify what's connected to the mystery part. At the top of the photo there's a white wire connected to a t...RodB — 01:48 PM
1949 Motorola 5A9M
I now have all the caps replaced. That combination choke and cap (E-1) was indeed just about 30 coils of 22 guage wire ...klondike98 — 11:34 AM
1949 Motorola 5A9M
Thanks for that info Arran. As it turns out rather than being very difficult (as I originally thought), removing the spe...klondike98 — 10:45 AM
Philco 42-345 Restoration/Repair
All resistors replaced and 1 Aluminum cap to go. I am questionable about something that looks like a resistor and hopefu...osanders0311 — 09:50 AM
New find. 91X code 225
These cabinets do provide some improvement in sound quality. I have a 111 and 112X, which is the same radio, the latter...morzh — 09:15 AM
Circuitry had me fooled.
HI Jim, I found one of these last summer, haven't taken the time to go thru it. Thanks for the post.Jimradio — 07:50 AM
1949 Motorola 5A9M
Bob; I was looking through one of my RCC manuals tonight, the one for 1948-49, and guess what I found? There was anot...Arran — 02:07 AM
New find. 91X code 225
The light is really very cool. Super job. PaulPaul Philco322 — 12:22 PM
Circuitry had me fooled.
Noise? I don't hear any noise.RodB — 12:07 PM

[-]
Who's Online
There are currently 1537 online users. [Complete List]
» 2 Member(s) | 1535 Guest(s)
AvatarAvatar

>