[Hamilton]

I’m slowly working on this 37-630 but it may be beyond my limited schematic reading abilities. 

The speaker wire was destroyed when I got it so I have attached three wires, #1 black wire to Pin 3 of the 6F6,  #2 red wire to the 8 mfd #58 electrolytic and #3 yellow wire to the 12 mfd #62 electrolytic. 

I just don’t know where to connect them onto the speaker connection itself. The photo is there to show the positions I have them soldered too temporarily and I was hoping someone could tell me where each wire should be properly attached.