Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Westinghouse N-202
#29

Here's the final post on this set showing the cabinet all back together and the backside with and without the back on it.  I did have an additional issue with the Shortwave band.  I could push through 7 to 11 MHz of modulated signal and hear it on the speaker but above 11MHz it was silent.  That was where I had to change bands on my signal generator so it could be my generator but the radio is also suspicously silent across the entire shortwave band when I just hook it up to my antena (granted, its only about 15' of antenna).  Nevertheless, that's all that's getting done on this set, at least by me. 

[Image: https://www.dropbox.com/s/km4r1fdiawllva....jpg?raw=1]
[Image: https://www.dropbox.com/s/vurj5g1e6f635t....jpg?raw=1]
[Image: https://www.dropbox.com/s/ul6t2693pu0ha1....jpg?raw=1]


Messages In This Thread
Westinghouse N-202 - by klondike98 - 03-29-2022, 07:11 PM
RE: Westinghouse N-202 - by captainclock1988 - 03-30-2022, 09:37 AM
RE: Westinghouse N-202 - by klondike98 - 03-30-2022, 03:42 PM
RE: Westinghouse N-202 - by GarySP - 03-30-2022, 04:01 PM
RE: Westinghouse N-202 - by klondike98 - 04-03-2022, 09:14 PM
RE: Westinghouse N-202 - by klondike98 - 05-06-2022, 08:54 PM
RE: Westinghouse N-202 - by Mondial - 05-06-2022, 09:31 PM
RE: Westinghouse N-202 - by captainclock1988 - 05-07-2022, 02:01 AM
RE: Westinghouse N-202 - by RodB - 05-07-2022, 07:44 AM
RE: Westinghouse N-202 - by klondike98 - 05-07-2022, 10:57 AM
RE: Westinghouse N-202 - by RodB - 05-07-2022, 12:35 PM
RE: Westinghouse N-202 - by klondike98 - 05-07-2022, 09:11 PM
RE: Westinghouse N-202 - by klondike98 - 05-14-2022, 08:29 PM
RE: Westinghouse N-202 - by RodB - 05-14-2022, 09:28 PM
RE: Westinghouse N-202 - by Chas - 05-15-2022, 09:01 AM
RE: Westinghouse N-202 - by klondike98 - 05-15-2022, 03:36 PM
RE: Westinghouse N-202 - by GarySP - 05-15-2022, 04:45 PM
RE: Westinghouse N-202 - by klondike98 - 05-15-2022, 06:00 PM
RE: Westinghouse N-202 - by Arran - 05-15-2022, 08:29 PM
RE: Westinghouse N-202 - by klondike98 - 05-16-2022, 11:54 AM
RE: Westinghouse N-202 - by klondike98 - 05-23-2022, 06:47 PM
RE: Westinghouse N-202 - by MrFixr55 - 05-23-2022, 08:17 PM
RE: Westinghouse N-202 - by klondike98 - 05-23-2022, 10:06 PM
RE: Westinghouse N-202 - by klondike98 - 05-25-2022, 08:22 PM
RE: Westinghouse N-202 - by GarySP - 05-25-2022, 09:06 PM
RE: Westinghouse N-202 - by radiorich - 05-25-2022, 10:50 PM
RE: Westinghouse N-202 - by klondike98 - 05-30-2022, 09:03 PM
RE: Westinghouse N-202 - by MrFixr55 - 05-31-2022, 06:18 AM
RE: Westinghouse N-202 - by klondike98 - 06-02-2022, 08:47 PM
RE: Westinghouse N-202 - by GarySP - 06-03-2022, 08:13 AM
RE: Westinghouse N-202 - by Paul Philco322 - 06-03-2022, 03:36 PM
RE: Westinghouse N-202 - by klondike98 - 06-13-2022, 09:43 PM
RE: Westinghouse N-202 - by MrFixr55 - 06-13-2022, 10:25 PM
RE: Westinghouse N-202 - by klondike98 - 06-15-2022, 06:03 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently no members online.

>