06-23-2022, 06:31 PM
Good. As for the 39/44 and the 36 use your ohm meter and measure the resistance between the two closest pins (1 and 5) with then out of the set. Should see a very low resistance like 1/2 ohm. It will probably read open which means they are kaput... Need a couple of replacements.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
