Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

37-116 odd noise/distortion
#1

Now, On start up i get a "blurp" sound (say it out loud---thats it)  after about 5 seconds and then the radio warms up and plays after about 15-20 seconds. I am also starting to get some distortion at the higher sound frequency's. (singing)  This has been hit and miss and less the longer the radio is on.

All this is new in the last 2 weeks.  The radio was recapped/resistored about 3 years ago by someone known to me to be reputable.  I play it about an hour every day.  I can hear something is going on, changing in the sound.  Yes this is AM radio and my reception varies greatly day to day but this is beyond that.

Since i believe the caps are ok and it does play well other that this occasional  higher frequency distortion/blurp, i am thinking a tube going bad?  

I dont have a tube tester.  All heaters are on, but i do have a few metal tubes.  They are warm,  not hot.
Start on the  Rf and Audio section?

http://www.nostalgiaair.org/Resources/199/M0013199.htm

Thanks

Bill


Messages In This Thread
37-116 odd noise/distortion - by poulsbobill - 07-12-2022, 07:08 PM
RE: 37-116 odd noise/distortion - by RodB - 07-13-2022, 10:19 AM
RE: 37-116 odd noise/distortion - by poulsbobill - 07-13-2022, 08:56 PM
RE: 37-116 odd noise/distortion - by poulsbobill - 07-22-2022, 10:45 PM
RE: 37-116 odd noise/distortion - by klondike98 - 07-23-2022, 02:14 PM
RE: 37-116 odd noise/distortion - by poulsbobill - 07-23-2022, 08:23 PM
RE: 37-116 odd noise/distortion - by morzh - 07-23-2022, 08:45 PM
RE: 37-116 odd noise/distortion - by poulsbobill - 07-24-2022, 07:16 PM
RE: 37-116 odd noise/distortion - by morzh - 07-24-2022, 07:56 PM
RE: 37-116 odd noise/distortion - by poulsbobill - 07-25-2022, 11:40 AM
RE: 37-116 odd noise/distortion - by morzh - 07-25-2022, 08:37 PM
RE: 37-116 odd noise/distortion - by poulsbobill - 07-25-2022, 08:49 PM
RE: 37-116 odd noise/distortion - by mikethedruid - 07-25-2022, 10:10 PM
RE: 37-116 odd noise/distortion - by morzh - 07-26-2022, 12:02 AM
RE: 37-116 odd noise/distortion - by mikethedruid - 07-26-2022, 03:06 AM
RE: 37-116 odd noise/distortion - by GarySP - 07-26-2022, 09:09 AM



Users browsing this thread:
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

[-]
Who's Online
There are currently 2609 online users. [Complete List]
» 2 Member(s) | 2607 Guest(s)
AvatarAvatar

>