08-30-2022, 07:41 PM
I would think that you have a short from B+ to B-. Measure the resistance across the output of the power supply. Should see something higher than 5 or 10K. Much lower you've got a solder bridge or wires touching that shouldn't be.
GL
GL
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry