[harley92]

Hi,

Thanks for the response. That helps. I will use my go to caps of 630 volts and they will easily fit inside the small cans. Now for the fun part of de-soldering the bottoms and removing the guts and the tar. Thanks for the help. FYI, I built a solid state vibrator circuit that was posted on a thread a while back. It works great, no hash and a nice square wave. the DC output is about 140 volts and the two rectifier diodes eliminates the other contacts. I put it in a jiffy box that screws down replacing old vibrator can cover, so it is can be removed to replace with the original vibrator if I wanted.
Now I just need to find some non-polorized electrolytic caps to restuff the filter cans.

Thanks again for the help,
Gerald