Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

CoRadio Help
#3

Just as general troubleshooting advise. Sound like the local osc isn't working. Check to see if the 12SA7 is in the proper socket. Bent plate on the tuning cap or weak 12SA7. Check to see if you have hv on the plates and screen grids of all the tube except the 35Z5 & 12SQ7 just plate. No sg. - lead on your voltmeter connects to the - side of your filter caps.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry


Messages In This Thread
CoRadio Help - by mister_big77 - 01-12-2023, 09:26 PM
RE: CoRadio Help - by Radioroslyn - 01-12-2023, 09:52 PM
RE: CoRadio Help - by Radioroslyn - 01-13-2023, 09:00 AM
RE: CoRadio Help - by mister_big77 - 01-13-2023, 09:18 AM
RE: CoRadio Help - by RodB - 01-13-2023, 09:48 AM
RE: CoRadio Help - by mister_big77 - 01-13-2023, 09:49 PM
RE: CoRadio Help - by RodB - 01-14-2023, 10:06 AM
RE: CoRadio Help - by mister_big77 - 01-16-2023, 12:11 AM
RE: CoRadio Help - by MrFixr55 - 01-17-2023, 04:37 AM
RE: CoRadio Help - by mister_big77 - 01-17-2023, 09:10 AM
RE: CoRadio Help - by MrFixr55 - 01-17-2023, 04:33 PM
RE: CoRadio Help - by mister_big77 - 01-18-2023, 01:29 PM
RE: CoRadio Help - by MrFixr55 - 01-18-2023, 03:12 PM
RE: CoRadio Help - by mister_big77 - 01-19-2023, 10:14 PM
RE: CoRadio Help - by MrFixr55 - 01-20-2023, 05:55 AM
RE: CoRadio Help - by mister_big77 - 01-21-2023, 07:45 PM
RE: CoRadio Help - by MrFixr55 - 01-22-2023, 12:01 AM
RE: CoRadio Help - by mister_big77 - 01-22-2023, 01:31 AM
RE: CoRadio Help - by Arran - 01-23-2023, 05:23 AM
RE: CoRadio Help - by MrFixr55 - 01-23-2023, 06:07 AM
RE: CoRadio Help - by Arran - 01-23-2023, 07:59 PM
RE: CoRadio Help - by mister_big77 - 01-23-2023, 08:47 PM
RE: CoRadio Help - by MrFixr55 - 01-24-2023, 05:31 PM
RE: CoRadio Help - by mister_big77 - 01-24-2023, 07:30 PM
RE: CoRadio Help - by mister_big77 - 01-24-2023, 09:01 PM
RE: CoRadio Help - by MrFixr55 - 01-25-2023, 01:11 AM
RE: CoRadio Help - by mister_big77 - 01-25-2023, 10:04 AM
RE: CoRadio Help - by mister_big77 - 01-25-2023, 10:38 AM
RE: CoRadio Help - by MrFixr55 - 01-29-2023, 08:46 PM
RE: CoRadio Help - by mister_big77 - 01-29-2023, 09:56 PM
RE: CoRadio Help - by MrFixr55 - 01-30-2023, 06:06 PM
RE: CoRadio Help - by mister_big77 - 01-30-2023, 10:23 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>