[462ron]

Hi Chas, no metal at all in my bench. These aren’t binocular coils like in certain other models. I have loosened the screws on the two outer tuning cap pulleys so I could rotate each independently of each other, I’ve tried a multitude of positions on these caps after first doing the recommended AK syncing procedure. I will recheck the two detector bias resistors, 270 and 180 ohms. I replaced them with carbon resistors because the originals were open. I’m going to work on replacing the computer ps so I can get a good 6V or better. I might try the rejuvenation process of running the filaments a little high, although they tested good!

Ron