Philco 60B block condensers doubts

Thread Rating:

CarlosRadio
Junior Member

Posts: 13
Threads: 6
Joined: Feb 2013
City: , Elche, Spain

03-01-2024, 07:56 PM

Hello,
I am repairing a Philco 60B and I have doubts about the block condensers

[Image: https://dl.dropboxusercontent.com/scl/fi...ffpl8&dl=0]

In the schematic, number 8 has a single 0.180uF capacitor. To which terminals should this capacitor be connected?

[Image: https://dl.dropboxusercontent.com/scl/fi...mo74x&dl=0]

Thank you, Greetings from Spain.

(This post was last modified: 03-01-2024, 08:03 PM by CarlosRadio.)

« Next Oldest | Next Newest »

Messages In This Thread

Philco 60B block condensers doubts - by CarlosRadio - 03-01-2024, 07:56 PM

Users browsing this thread: 1 Guest(s)

Recent Posts
Philco 60 Squealing
Wondering if I did it backwards. If a coil was wound backwards, the oscillator would not work at all. Old school...Chas — 07:23 PM
Philco 38-7 Speaker
4-ohm speaker. Black, Green leads.tludka — 07:00 PM
Philco 42-390, code 121 speaker
#87 on the schematic. This radio had a 8" Zenith speaker attached to it when I got it. I do don't know the hist...Stevelog — 06:39 PM
Philco 60 Squealing
I'm pretty sure I now have the litz wire soldered. This did not make any difference. Back in April I rewound the seconda...dconant — 06:25 PM
Philco 38-7 Speaker
Just to make sure, you chose either 4 ohm into 5K or into 10K? (blk-org or blk-grn)morzh — 06:23 PM
Philco 38-7 Speaker
I have let this one sit because of other duties. Now I am back, and I have a couple of questions. I hooked up a Hammond ...tludka — 05:34 PM
Philco 42-390, code 121 speaker
>>A closer examination of the very small print schematic indicates that the speaker is a PM type. This shows a ...morzh — 05:18 PM
Philco 60 Squealing
Litz is typically tinned by simply rubbing it with the soldering iron tip while immersed in solder (and a bit of rosin f...morzh — 05:14 PM
Philco 6K7
The suppressor grid (if by G3 you mean the S) is usually at the Cathode potential, which in this caes is GND. I am not ...morzh — 05:10 PM
Philco 16B Parts
Thanks for the reply. Unfortunately the radio was removed before bidding was over so I didn't get a chance to bid.dconant — 04:10 PM

Who's Online
There are currently no members online.