04-19-2024, 12:23 PM
Question on restuffing the big can on the 20. Mike, can you elaborate on the technique/process for getting the can off without unsoldering or removing any of the wiring underneath? Do you snip the wires coming into the holes before trying to lift off? I get heating the can and removing guts, etc - once off the unit. But I'm not picking up on how you got it off the chassis without unsoldering wires underneath. I need 20 can removal for dummies.
(not sure if it is proper phorum protocol to revive an old post to continue discussing, or start a new post, so my apologies if I did it wrong).
(not sure if it is proper phorum protocol to revive an old post to continue discussing, or start a new post, so my apologies if I did it wrong).
Craftsmanship is an ongoing cycle of learning fueled by patience, persistence, and care, where every project refines our judgment and challenges our skills, in the steady pursuit of the Path to Mastery.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
