Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Restoring Philco 37-604C
#17

Tonight I took apart the tuning cap gear, which worked fine, but I figured it would be all gunky inside, which it was.
It took me 5 minutes to remember how to get the gear back together, after I had cleaned and re-lubricated .
the whole thing.

Then I measured the Candohm, the 133/15 Ohm part. The 133 resistor alone should be dissipating 11-12W.
This is probably why this Candohm is bad. The 133 Ohm is 190 Ohm, and 15 Ohm is 109 Ohm.
I decided that I will use 8.3uF cap to sub for the resistor (did that in the past) and then use a resistor for the 15 Ohm. This will save me power dissipation, and I do not need the DC performance.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
Restoring Philco 37-604C - by morzh - 10-08-2024, 10:40 PM
RE: Restoring Philco 37-604C - by MrFixr55 - 10-09-2024, 10:30 PM
RE: Restoring Philco 37-604C - by morzh - 10-09-2024, 10:51 PM
RE: Restoring Philco 37-604C - by RodB - 10-10-2024, 09:50 AM
RE: Restoring Philco 37-604C - by morzh - 10-10-2024, 10:12 AM
RE: Restoring Philco 37-604C - by morzh - 10-10-2024, 01:10 PM
RE: Restoring Philco 37-604C - by morzh - 10-10-2024, 08:36 PM
RE: Restoring Philco 37-604C - by RodB - 10-10-2024, 09:03 PM
RE: Restoring Philco 37-604C - by radiorich - 10-10-2024, 09:14 PM
RE: Restoring Philco 37-604C - by morzh - 10-10-2024, 09:39 PM
RE: Restoring Philco 37-604C - by Arran - 10-10-2024, 11:08 PM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 08:58 AM
RE: Restoring Philco 37-604C - by radiorich - 10-11-2024, 09:39 AM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 10:42 AM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 02:25 PM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 02:30 PM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 07:52 PM
RE: Restoring Philco 37-604C - by Arran - 10-11-2024, 08:02 PM
RE: Restoring Philco 37-604C - by morzh - 10-11-2024, 08:15 PM
RE: Restoring Philco 37-604C - by Arran - 10-12-2024, 02:14 PM
RE: Restoring Philco 37-604C - by morzh - 10-12-2024, 02:18 PM
RE: Restoring Philco 37-604C - by Chas - 10-12-2024, 02:25 PM
RE: Restoring Philco 37-604C - by morzh - 10-12-2024, 02:40 PM
RE: Restoring Philco 37-604C - by radiorich - 10-12-2024, 02:46 PM
RE: Restoring Philco 37-604C - by morzh - 10-12-2024, 03:03 PM
RE: Restoring Philco 37-604C - by RodB - 10-12-2024, 04:08 PM
RE: Restoring Philco 37-604C - by morzh - 10-12-2024, 07:56 PM
RE: Restoring Philco 37-604C - by morzh - 10-13-2024, 02:41 PM
RE: Restoring Philco 37-604C - by Arran - 10-13-2024, 03:38 PM
RE: Restoring Philco 37-604C - by morzh - 10-13-2024, 05:32 PM
RE: Restoring Philco 37-604C - by morzh - 10-13-2024, 07:18 PM
RE: Restoring Philco 37-604C - by morzh - 10-18-2024, 10:38 PM
462ron - by 462ron - 10-19-2024, 07:29 AM
RE: Restoring Philco 37-604C - by morzh - 10-19-2024, 03:05 PM
RE: Restoring Philco 37-604C - by radiorich - 10-20-2024, 12:02 AM
462ron - by 462ron - 10-20-2024, 08:56 AM
RE: Restoring Philco 37-604C - by morzh - 10-20-2024, 10:59 AM
RE: Restoring Philco 37-604C - by morzh - 10-20-2024, 11:49 AM
RE: Restoring Philco 37-604C - by morzh - 10-20-2024, 09:12 PM
RE: Restoring Philco 37-604C - by radiorich - 10-21-2024, 01:25 AM
RE: Restoring Philco 37-604C - by Arran - 10-23-2024, 05:28 PM
RE: Restoring Philco 37-604C - by Chas - 10-23-2024, 05:46 PM
RE: Restoring Philco 37-604C - by morzh - 10-23-2024, 08:47 PM
RE: Restoring Philco 37-604C - by Arran - 10-23-2024, 11:03 PM
RE: Restoring Philco 37-604C - by MrFixr55 - 10-24-2024, 08:31 AM
RE: Restoring Philco 37-604C - by morzh - 10-24-2024, 09:12 AM
RE: Restoring Philco 37-604C - by morzh - 10-24-2024, 09:13 PM
RE: Restoring Philco 37-604C - by morzh - 10-25-2024, 09:21 PM
RE: Restoring Philco 37-604C - by radiorich - 10-26-2024, 12:45 AM
RE: Restoring Philco 37-604C - by RodB - 10-26-2024, 09:09 AM
RE: Restoring Philco 37-604C - by morzh - 10-26-2024, 10:04 AM
RE: Restoring Philco 37-604C - by morzh - 10-26-2024, 10:15 AM
RE: Restoring Philco 37-604C - by radiorich - 10-26-2024, 12:54 PM
RE: Restoring Philco 37-604C - by morzh - 10-26-2024, 02:14 PM
RE: Restoring Philco 37-604C - by radiorich - 10-26-2024, 04:07 PM
RE: Restoring Philco 37-604C - by morzh - 10-26-2024, 07:53 PM
RE: Restoring Philco 37-604C - by morzh - 10-26-2024, 08:14 PM
RE: Restoring Philco 37-604C - by radiorich - 10-26-2024, 11:56 PM
RE: Restoring Philco 37-604C - by Arran - 10-27-2024, 02:32 AM
RE: Restoring Philco 37-604C - by morzh - 10-27-2024, 10:34 AM
RE: Restoring Philco 37-604C - by morzh - 10-27-2024, 03:16 PM
RE: Restoring Philco 37-604C - by morzh - 10-29-2024, 10:22 PM
RE: Restoring Philco 37-604C - by Arran - 10-30-2024, 01:40 AM
RE: Restoring Philco 37-604C - by morzh - 10-30-2024, 09:20 AM
RE: Restoring Philco 37-604C - by Arran - 10-30-2024, 04:26 PM
RE: Restoring Philco 37-604C - by morzh - 10-30-2024, 08:02 PM
RE: Restoring Philco 37-604C - by MrFixr55 - 10-30-2024, 10:09 PM
RE: Restoring Philco 37-604C - by morzh - 10-31-2024, 07:57 AM
RE: Restoring Philco 37-604C - by MrFixr55 - 10-31-2024, 10:23 AM
RE: Restoring Philco 37-604C - by morzh - 10-31-2024, 02:30 PM
RE: Restoring Philco 37-604C - by morzh - 10-31-2024, 09:40 PM
RE: Restoring Philco 37-604C - by Arran - 11-01-2024, 02:49 PM
RE: Restoring Philco 37-604C - by morzh - 11-01-2024, 02:59 PM
RE: Restoring Philco 37-604C - by morzh - 11-01-2024, 09:03 PM
RE: Restoring Philco 37-604C - by Arran - 11-01-2024, 09:51 PM
RE: Restoring Philco 37-604C - by morzh - 11-01-2024, 09:58 PM
RE: Restoring Philco 37-604C - by morzh - 11-02-2024, 02:07 PM
RE: Restoring Philco 37-604C - by radiorich - 11-02-2024, 03:18 PM
RE: Restoring Philco 37-604C - by MrFixr55 - 11-02-2024, 09:35 PM
RE: Restoring Philco 37-604C - by morzh - 11-03-2024, 02:44 PM
RE: Restoring Philco 37-604C - by morzh - 11-05-2024, 09:39 PM
RE: Restoring Philco 37-604C - by Arran - 11-05-2024, 10:32 PM
RE: Restoring Philco 37-604C - by morzh - 11-06-2024, 08:16 AM
RE: Restoring Philco 37-604C - by radiorich - 11-06-2024, 09:13 AM
RE: Restoring Philco 37-604C - by morzh - 11-06-2024, 09:54 AM
RE: Restoring Philco 37-604C - by Arran - 11-06-2024, 05:08 PM
RE: Restoring Philco 37-604C - by morzh - 11-08-2024, 08:58 PM
RE: Restoring Philco 37-604C - by radiorich - 11-09-2024, 01:11 AM
RE: Restoring Philco 37-604C - by morzh - 11-09-2024, 03:18 PM
RE: Restoring Philco 37-604C - by Arran - 11-12-2024, 01:32 AM
RE: Restoring Philco 37-604C - by morzh - 11-12-2024, 09:14 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently no members online.

>