10-22-2024, 11:25 AM
You can just disconnect it for now from the can. It will just add some 60cy hum but no damage to the circuit. Something else you can do is use an ohm meter to look for low resistances on the B+ line. Should see upwards of 5 to 10k ohms, if you see 100's of ohms I would investigate.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
