Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RCA 18T...time to call the experts for help
#11

Could there be a wiring error perhaps? In recapping a radio it's easy to get two adjacent tie points mixed up. I'm wondering about the pushbutton assembly, normally it has to be connected for the set to work and be connected properly if it uses tuned circuits and switches, normally these electric push buttons connect between the antenna and oscillator stages. Does this set use a loop antenna or does it have a proper antenna coil? Have you tried the set on short wave with an external antenna?
Regards
Arran


Messages In This Thread
RCA 18T...time to call the experts for help - by don'tdomelikethat - 07-12-2011, 11:11 AM
Re: RCA 18T...time to call the experts for help - by don'tdomelikethat - 07-14-2011, 08:43 AM
Re: RCA 18T...time to call the experts for help - by don'tdomelikethat - 07-23-2011, 01:56 PM
Re: RCA 18T...time to call the experts for help - by don'tdomelikethat - 07-25-2011, 10:05 AM
Re: RCA 18T...time to call the experts for help - by Arran - 07-29-2011, 06:02 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
With regard to the speaker, unless the cone is so brittle that it crumbles as soon as you touch it I would try to repair...Arran — 04:07 AM
Philco 42-345 Restoration/Repair
That silver can capacitor is an aluminum electrolytic. You should replace it with an aluminum electrolytic with the valu...RodB — 11:46 PM
Philco 42-345 Restoration/Repair
Thank you Rodb and Gary for helping with clarification on these capacitors. Other than the Tiny 630volt one I'm not sure...osanders0311 — 10:17 PM
1949 Motorola 5A9M
Hello All; I found the CMB41L down in the basement, it is definitely a 1950-51 model, the capacitors have date codes ...Arran — 07:48 PM
Philco 42-345 Restoration/Repair
Hi, all the caps I order, other than the electrolytics, are of the 630V rating. No worries on it being too high, and no ...gary rabbitt — 05:46 PM
Philco 42-345 Restoration/Repair
Hi, there's a lot to consider when designing these circuits so you shouldn't have a lot of concern when replacing caps. ...RodB — 02:03 PM
Philco 42-345 Restoration/Repair
I have ordered and received new caps for this radio and hope I've ordered the correct ones. I tried matching them to the...osanders0311 — 11:35 AM
Philco newbie with P-1891-WA console questions
Hello Jeff , Far as the Electrolytic capacitors go here is a list of parts. that will work . I like using Nichicon and...radiorich — 09:50 PM
Philco newbie with P-1891-WA console questions
Well, I've been stumped at trying to get the first of 11 electrolytic capacitors. I got a schematic and have a list of t...Jeffcon — 07:54 PM
Model 80 Antenna Issue?
Thanks Gary and Rod.  I also found an article in the Philco Repair Bench under Service Hints and Tips, about installi...Hamilton — 12:32 PM

[-]
Who's Online
There are currently 395 online users. [Complete List]
» 3 Member(s) | 392 Guest(s)
AvatarAvatarAvatar

>