[morzh]

Not to self: link to the 60 evolution article

https://philcoradio.com/library/index.ph...-model-60/

So, I found out mine is at least Run 4 as, while rebuilding the big tin capacitor can, I found 5 capacitors, and the first 3 runs have 4.

The can, cut off from the wires is this:
   

Taken apart:
   


Caps inserted:
   
   

Then they are potted around where the wires go through the front wall and the can assembled.
   


I did not mark the wires as the caps have different values, and the two, that are the same, are interchangeable.
The values are in uF:
0.1
0.1
0.047.
0.22
1

(I subbed 1uF for 0.5uF, as this won't hurt anything, part of the power filter, and if anything, will improve filtering).