Philco 16B code 125 cabinet color

Thread Rating:

Terry Judkins
Member

Posts: 91
Threads: 5
Joined: Oct 2005
City: Atlanta GA

07-06-2006, 10:02 PM

Thanks stud.
Here is the finished radio. Dark walnut might have been better but it looks OK to me...

[Image: http://home.comcast.net/~suptjud/Philco165.jpg]

Kind regards,
Terry
http://home.comcast.net/~suptjud/
"Life is simpler when you plow around the stump."

« Next Oldest | Next Newest »

Messages In This Thread

[No subject] - by 49Stude63 - 07-06-2006, 03:49 PM

[No subject] - by Terry Judkins - 07-06-2006, 10:02 PM

[No subject] - by Bill Hutchinson - 07-07-2006, 06:30 PM

Users browsing this thread: 3 Guest(s)

Recent Posts
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit. That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM

Who's Online

There are currently 5271 online users. [Complete List]
» 2 Member(s) | 5269 Guest(s)