03-01-2025, 03:36 PM
Hello, I sure hope there is someone out there that knows this radio. I am just getting started on scoping out the schematic.
I am likely to have many questions on this radio since there has been a lot of hacking and slashing going on in there. Some mods to the wiring as well.
The tubes are 2.5 filaments except for the 80 tube. The 2.5 filaments are all tied back to the power transformer which has terminals instead of wires coming out of it. Can I wire these from tube to tube and therefore have just one wire going to each terminal of the 2.5 terminals? Would this likely to be because of current?
I am likely to have many questions on this radio since there has been a lot of hacking and slashing going on in there. Some mods to the wiring as well.
The tubes are 2.5 filaments except for the 80 tube. The 2.5 filaments are all tied back to the power transformer which has terminals instead of wires coming out of it. Can I wire these from tube to tube and therefore have just one wire going to each terminal of the 2.5 terminals? Would this likely to be because of current?
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
