Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Mystery radio - identification, etc. sought
#2

Hi and welcome to the phourn!
Post subject: Mystery radio - identification, etc. sought Reply with quote
The attached file shows 3 pictures I scanned in of an old Philco radio my parents got,t ahnks to a friend of theirs who said his neighbor was throwing out a bunch of stuff since she was moving.

The model says "Philco model 610" - that in itself puzzles me because I didn't see that model number listed; I suppose it could be a part number becasue there are some others below. There is no back, just exposed wires, so I didn't get a picture of that. (I was amazed when my mom said she remembers my grandpa taking wires from their first TV - also with no back - tot he drugstore and testing to see if they worked. I never knew TVs also didn't have backs at first.)

It is a model 610 and didn't come with a back. It needs some ventilation.


1. What year would this be - is the 610 a model number or a part number like the others below it appear to be?

Was made in 1935-36.

2. My dad already replaced the plug that used to go into the wall with a new one, as the old one was really old and wouldn't work. What needs to be done to get the AM/FM switch working? My guess is what happened was some sort of stripping of the dial that changes stations, but I know almost nothign about electronics

Buy another radio. That set never covered the FM BC band. It does cover the AM BC band and two Shortwave bands.

3. Is it logical to presume that the station parkings were somehow rubbed off when it was restored before? Unfortunately, I don't think my parents are going to be able to learn what happened or how it was restored.

It's very common for someone to try to clean the dial and remove the printing. Replacement dials are available for the set.

Don't try to make it work before having someone service it as it can damage the set.
The 610 is a nice easy set to work on and is a good performer. Just repaired one a few months ago just like your set. It also came in a table model too.
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry


Messages In This Thread
Re: Mystery radio - identification, etc. sought - by 7estatdef - 08-13-2011, 07:20 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>