05-18-2025, 11:57 PM
Hi PittsburgTost.
The record changer looks like a Garrard or BSR (Likely Garrard). The spindles just pull out and push in. A spring clip holds them in place. Lift the arm that holds the records, change the spindles. Stack the records on the spindles and lower the arm over it. push the Off - On - Auto (or Reject) switch to Auto (or Reject). The first record should drop with the others remaining in place, the tone arm should raisefrom its perch, and move to the lead-in groove of the record. After playing, or if you decide to change the record by sliding the control to reject, the tone arm will lift, retract to the area of its perch and the next record will drop. The procedure repeats.
Hope this helps.
The record changer looks like a Garrard or BSR (Likely Garrard). The spindles just pull out and push in. A spring clip holds them in place. Lift the arm that holds the records, change the spindles. Stack the records on the spindles and lower the arm over it. push the Off - On - Auto (or Reject) switch to Auto (or Reject). The first record should drop with the others remaining in place, the tone arm should raisefrom its perch, and move to the lead-in groove of the record. After playing, or if you decide to change the record by sliding the control to reject, the tone arm will lift, retract to the area of its perch and the next record will drop. The procedure repeats.
Hope this helps.
"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis
Best Regards,
MrFixr55
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
