07-14-2025, 08:51 AM
Rod
Mua-ha-ha-ha
JonnyM
When cutting the shaft, make sure you measure not the shaft itself but to the common reference plane, that is to the chassis' bracket to which the point is mounted. Different pots can have different bushing length and different distance between the start of the shaft and the mounting bracket, so you need to make sure the distance is the same from the tip of the shaft to the mounting bracket's front. Otherwise it may come out longer or shorter (former is better, can be corrected, the latter cannot).
Mua-ha-ha-ha
JonnyM
When cutting the shaft, make sure you measure not the shaft itself but to the common reference plane, that is to the chassis' bracket to which the point is mounted. Different pots can have different bushing length and different distance between the start of the shaft and the mounting bracket, so you need to make sure the distance is the same from the tip of the shaft to the mounting bracket's front. Otherwise it may come out longer or shorter (former is better, can be corrected, the latter cannot).
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
