08-26-2025, 01:16 PM
Welcome to the Phorum!
If you are working on a 60, you should review the following article on the Evolution of the 60 found in our library: https://philcoradio.com/library/index.ph...-model-60/
Are you referring to the clip on the chassis that is probably labeled GND? I worked on a 60MB and it had a GND clip and and ANT clip. The GND would have been connected to a copper cold water pipe in the old days to provide a solid ground for the radio. I just leave mine disconnected and the radio seems to work fine.
[Image: https://www.dropbox.com/scl/fi/v4elxw72u...eg8w&raw=1]
(FYI....now that you have posted twice, your posts will appear immediately rather than being delayed for moderation.)
If you are working on a 60, you should review the following article on the Evolution of the 60 found in our library: https://philcoradio.com/library/index.ph...-model-60/
Are you referring to the clip on the chassis that is probably labeled GND? I worked on a 60MB and it had a GND clip and and ANT clip. The GND would have been connected to a copper cold water pipe in the old days to provide a solid ground for the radio. I just leave mine disconnected and the radio seems to work fine.
[Image: https://www.dropbox.com/scl/fi/v4elxw72u...eg8w&raw=1]
(FYI....now that you have posted twice, your posts will appear immediately rather than being delayed for moderation.)
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
