08-27-2011, 08:21 AM
I noticed that on the service info I referenced, after the cap values on the parts list, there are reference numbers for the caps such as C1, C2, etc., which could be matched up if the parts are laid out the same in your radio as they are on the layout drawing.
The parts list for the 331 did not have these references.
Do the stock numbers on the parts list match anything printed on the caps?
I have an old RCA-Victor RE-57 that I haven't started because of the size of the unit plus the original owner made several modifications.
The parts list for the 331 did not have these references.
Do the stock numbers on the parts list match anything printed on the caps?
I have an old RCA-Victor RE-57 that I haven't started because of the size of the unit plus the original owner made several modifications.
Carl
Northern Panhandle, WV
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
