Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x


1937 Sky Rover - Belmont
#24

Hi Ron, I found that my 41-255 does perform fairly well on the shortwave bands. But, like you said, the impedance matching is already built in. I did try another antenna option, the radio wants a long wire antenna so I made another one out of CAT5 cable. I cut off about an 8 foot length of cable and wired the twisted pairs in series with one another. So I ended up with 32 feet of antenna that is folded on itself. It is end fed, the other end is not grounded. It works rather well, and, unfortunately, so does the static. I coiled the cable into a loose coil and that made a reduction in the static. But it also made a big difference in SW reception. Whereas my loop did not do very well on SW reception. I still think the antenna padders need to be checked with the loop attached. Probably grasping at straws!!
Let me know how your homemade loop works on your 39-25.
Rich


Messages In This Thread
1937 Sky Rover - Belmont - by RichG - 10-10-2025, 03:55 PM
RE: 1937 Sky Rover - Belmont - by Paul Philco322 - 10-10-2025, 05:17 PM
RE: 1937 Sky Rover - Belmont - by radiorich - 10-10-2025, 07:00 PM
RE: 1937 Sky Rover - Belmont - by Arran - 10-10-2025, 10:06 PM
RE: 1937 Sky Rover - Belmont - by RichG - 10-11-2025, 01:23 AM
RE: 1937 Sky Rover - Belmont - by Arran - 10-11-2025, 11:41 PM
RE: 1937 Sky Rover - Belmont - by RichG - 10-12-2025, 01:06 PM
RE: 1937 Sky Rover - Belmont - by Arran - 10-12-2025, 07:02 PM
RE: 1937 Sky Rover - Belmont - by RichG - 11-24-2025, 04:10 PM
RE: 1937 Sky Rover - Belmont - by Paul Philco322 - 11-24-2025, 09:27 PM
RE: 1937 Sky Rover - Belmont - by RodB - 11-24-2025, 10:36 PM
RE: 1937 Sky Rover - Belmont - by RichG - 11-25-2025, 12:28 AM
RE: 1937 Sky Rover - Belmont - by radiorich - 11-25-2025, 01:07 AM
RE: 1937 Sky Rover - Belmont - by MrFixr55 - 11-25-2025, 01:43 AM
462ron - by 462ron - 11-25-2025, 08:43 AM
RE: 1937 Sky Rover - Belmont - by RichG - 11-25-2025, 01:28 PM
RE: 1937 Sky Rover - Belmont - by RichG - 11-25-2025, 09:25 PM
RE: 1937 Sky Rover - Belmont - by Paul Philco322 - 11-25-2025, 10:08 PM
RE: 1937 Sky Rover - Belmont - by MrFixr55 - 11-26-2025, 07:15 AM
462ron - by 462ron - 11-26-2025, 07:43 AM
RE: 1937 Sky Rover - Belmont - by RodB - 11-26-2025, 11:19 AM
RE: 1937 Sky Rover - Belmont - by RichG - 11-26-2025, 04:25 PM
462ron - by 462ron - 11-26-2025, 05:06 PM
RE: 1937 Sky Rover - Belmont - by RichG - 11-26-2025, 08:06 PM
462ron - by 462ron - 11-27-2025, 10:22 AM
RE: 1937 Sky Rover - Belmont - by RichG - 12-10-2025, 08:07 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated. By dconant. Dittos'Jimradio — 08:01 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind, even if it's a U.S.N power supply. I have a book somewhere abo...Arran — 02:56 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
hello david, I have a similar generator in my collection that features a cast iron, single-cylinder Briggs & Stratt...radiorich — 01:00 AM
under chassis parts locator diagram for 1938 Zenith 9s262
Has anyone gone to the trouble of creating an under chassis parts locator image?  Yes, I can identify components by foll...bobloney — 08:57 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Try looking at this site the book mark is for a old generator that I was given. David    https://radionerds.com/index.ph...David — 08:36 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Hello Everyone, I am looking for voltage identification for all the pin positions on the socket of a CRV-20130 power su...Tonym4704 — 08:16 PM
Philco P45-6365 Universal Transformer Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM
54C Complete Teardown/Rebuild
I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM
HiFi (Chifi) tube amp build - but my own design.
It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM
Philco 71 Code 125
Hello,  I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM

[-]
Who's Online
There are currently 2252 online users. [Complete List]
» 1 Member(s) | 2251 Guest(s)
Avatar

>