[mikeyg]

I have the new output transformer in and am wiring it up. I see where one lead from the old output transformer was connected to. This spot is where one wire that goes to the speaker connects. This is grounded to the chassis. There are two other wires to the speaker near that. They go across a resistor. It looks like the positive from my filter cap goes to one side of that resistor as well. Need help where to ground terminal c. Do I tie it to where the wire from the original output transformer was that is grounded to the chassis? And where to put my wire from terminal one from the output transformer. This is the p-t291 part that I ordered. I hope this makes sense and isn’t super vague it makes sense to me.