Model 41-287 volume issue

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Linear Mode

mikeyg
Junior Member

Posts: 19
Threads: 1
Joined: Dec 2025
City: Columbus State, Province, Country: GA

#47

12-15-2025, 12:59 PM

I will definitely check those grid voltages. If they aren’t what they need to be what might be the next step to check? I have some contact cleaner. It’s not deoxit but I have used it before. I’m going to check my solder joints real good at my pot as well. That actually ended up being my issue. I had a cold solder joint that just wasn’t making good contact on my ground. I have a couple of extra 41 tubes just want to see if they are any better than the ones that are currently in there

Find

« Next Oldest | Next Newest »

Messages In This Thread

Model 41-287 volume issue - by mikeyg - 12-08-2025, 01:00 PM

RE: Model 41-287 volume issue - by klondike98 - 12-08-2025, 03:11 PM

RE: Model 41-287 volume issue - by Vlad95 - 12-08-2025, 03:27 PM

RE: Model 41-287 volume issue - by RodB - 12-08-2025, 04:36 PM

RE: Model 41-287 volume issue - by KCMike - 12-08-2025, 06:23 PM

RE: Model 41-287 volume issue - by mikeyg - 12-08-2025, 07:51 PM

RE: Model 41-287 volume issue - by Arran - 12-08-2025, 10:49 PM

RE: Model 41-287 volume issue - by mikeyg - 12-09-2025, 08:07 AM

RE: Model 41-287 volume issue - by mikeyg - 12-09-2025, 01:46 PM

RE: Model 41-287 volume issue - by RodB - 12-09-2025, 02:09 PM

RE: Model 41-287 volume issue - by mikeyg - 12-09-2025, 03:11 PM

RE: Model 41-287 volume issue - by RodB - 12-09-2025, 05:10 PM

RE: Model 41-287 volume issue - by mikeyg - 12-09-2025, 07:57 PM

RE: Model 41-287 volume issue - by RodB - 12-09-2025, 10:00 PM

RE: Model 41-287 volume issue - by mikeyg - 12-10-2025, 07:03 AM

RE: Model 41-287 volume issue - by RodB - 12-10-2025, 09:56 AM

RE: Model 41-287 volume issue - by mikeyg - 12-10-2025, 10:07 AM

RE: Model 41-287 volume issue - by RodB - 12-10-2025, 11:10 AM

RE: Model 41-287 volume issue - by mikeyg - 12-10-2025, 01:14 PM

RE: Model 41-287 volume issue - by RodB - 12-10-2025, 08:07 PM

RE: Model 41-287 volume issue - by mikeyg - 12-10-2025, 08:10 PM

RE: Model 41-287 volume issue - by RodB - 12-10-2025, 08:29 PM

RE: Model 41-287 volume issue - by RodB - 12-10-2025, 08:42 PM

RE: Model 41-287 volume issue - by RodB - 12-10-2025, 08:53 PM

RE: Model 41-287 volume issue - by mikeyg - 12-11-2025, 09:20 AM

RE: Model 41-287 volume issue - by RodB - 12-11-2025, 09:42 AM

RE: Model 41-287 volume issue - by Arran - 12-11-2025, 09:45 AM

RE: Model 41-287 volume issue - by MrFixr55 - 12-11-2025, 12:39 PM

RE: Model 41-287 volume issue - by mikeyg - 12-11-2025, 01:04 PM

RE: Model 41-287 volume issue - by Vlad95 - 12-11-2025, 01:42 PM

RE: Model 41-287 volume issue - by mikeyg - 12-11-2025, 07:53 PM

RE: Model 41-287 volume issue - by RodB - 12-11-2025, 09:06 PM

RE: Model 41-287 volume issue - by Arran - 12-12-2025, 02:20 AM

RE: Model 41-287 volume issue - by RodB - 12-12-2025, 12:46 PM

RE: Model 41-287 volume issue - by Arran - 12-12-2025, 06:51 PM

RE: Model 41-287 volume issue - by RodB - 12-12-2025, 07:09 PM

RE: Model 41-287 volume issue - by mikeyg - 12-13-2025, 06:22 PM

RE: Model 41-287 volume issue - by RodB - 12-13-2025, 10:03 PM

RE: Model 41-287 volume issue - by mikeyg - 12-13-2025, 10:13 PM

RE: Model 41-287 volume issue - by RodB - 12-13-2025, 11:55 PM

RE: Model 41-287 volume issue - by mikeyg - 12-14-2025, 12:52 AM

RE: Model 41-287 volume issue - by RodB - 12-14-2025, 11:11 AM

RE: Model 41-287 volume issue - by mikeyg - 12-14-2025, 04:52 PM

RE: Model 41-287 volume issue - by RodB - 12-14-2025, 05:20 PM

RE: Model 41-287 volume issue - by mikeyg - 12-15-2025, 09:58 AM

RE: Model 41-287 volume issue - by RodB - 12-15-2025, 11:28 AM

RE: Model 41-287 volume issue - by mikeyg - 12-15-2025, 12:59 PM

RE: Model 41-287 volume issue - by RodB - 12-15-2025, 01:24 PM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Try looking at this site the book mark is for a old generator that I was given. David https://radionerds.com/index.ph...David — 08:36 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Hello Everyone, I am looking for voltage identification for all the pin positions on the socket of a CRV-20130 power su...Tonym4704 — 08:16 PM
Philco P45-6365 Universal Transformer Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM
54C Complete Teardown/Rebuild
I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM
HiFi (Chifi) tube amp build - but my own design.
It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM
Philco 71 Code 125
Hello, I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated.dconant — 07:57 AM
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM

Who's Online
There are currently no members online.

Login
Username:
Password:	Lost Password?
	Remember me