01-05-2026, 11:44 AM
Dale, I don't have such a tool and really don't know what it is.
I have another 60 that plays very well so I will be using that to compare with my current one. So far all my parts are in the right place. I have not checked the Bakelite blocks yet to see if put a wrong value in one of them. I did discover I messed up one of the caps in the by pass block (#20). Put a .05 in where should have been .5. Made no difference except maybe a little more volume. I'm beginning to suspect the antenna coil. I thought I had rewound the outer coil but I didn't. Must have done that in my sleep. Measuring pins 2 and 3 to ground on the good radio I get 2.3 megs and on the other I get 4 meg. I hope that is not one of the longer windings.
It is going to be a little slow for a while as I have another project I really should be spending more time on.
I have another 60 that plays very well so I will be using that to compare with my current one. So far all my parts are in the right place. I have not checked the Bakelite blocks yet to see if put a wrong value in one of them. I did discover I messed up one of the caps in the by pass block (#20). Put a .05 in where should have been .5. Made no difference except maybe a little more volume. I'm beginning to suspect the antenna coil. I thought I had rewound the outer coil but I didn't. Must have done that in my sleep. Measuring pins 2 and 3 to ground on the good radio I get 2.3 megs and on the other I get 4 meg. I hope that is not one of the longer windings.
It is going to be a little slow for a while as I have another project I really should be spending more time on.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
