Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x


1946 Telechron 8H59 "Musalarm"
#1

I believe this model was manufactured for a couple years after its introduction in 1946 based on the Telechron.net website. They say the price was in the $29.95 to $35.65 range. $29.95 in 1946 is about $497 in 2026 dollars.

Here's the SCHEMATIC LINK. I did notice that instead of the 35Z5GT rectifier tube specified in the schematic, there is a 35W4GT tube in the radio. Looks factory to me and had to be a modifcation at some point since the Z5 is an 8 pin tube; the W4 a 7 pin and the socket is a 7 pin socket.

   

   

As I mentioned in the "New Years Finds" thread, the Alarm/Radio ON/OFF stem is broken off and the two knobs that go with the clock are missing. After looking around I did find a possible stem fix that may or may not actually work (Renovated Radios has a stem repair kit) but for just a bit more than the price of that plus a couple of new knobs I was able to locate a working Telechron 8H61 alarm switch that I think will be a drop in solution. We'll see once it is here.

Its a bit dusty inside but I think it will clean up well. Under the chassis is pretty clean although its another tight fit for recapping.
   
   

The cabinet came up nicely after a clean and polish.
   

More later...


Messages In This Thread
1946 Telechron 8H59 "Musalarm" - by klondike98 - 01-18-2026, 08:02 PM
RE: 1946 Telechron 8H59 "Musalarm" - by morzh - 01-21-2026, 10:02 PM
RE: 1946 Telechron 8H59 "Musalarm" - by morzh - 01-21-2026, 10:15 PM
RE: 1946 Telechron 8H59 "Musalarm" - by radiorich - 01-21-2026, 10:26 PM
RE: 1946 Telechron 8H59 "Musalarm" - by MrFixr55 - 01-22-2026, 06:36 AM
RE: 1946 Telechron 8H59 "Musalarm" - by Arran - 01-22-2026, 09:22 PM
RE: 1946 Telechron 8H59 "Musalarm" - by radiorich - 01-23-2026, 12:21 AM
RE: 1946 Telechron 8H59 "Musalarm" - by Arran - 01-23-2026, 02:00 AM
RE: 1946 Telechron 8H59 "Musalarm" - by RodB - 01-23-2026, 10:50 AM
RE: 1946 Telechron 8H59 "Musalarm" - by morzh - 01-23-2026, 02:07 PM
RE: 1946 Telechron 8H59 "Musalarm" - by MrFixr55 - 01-23-2026, 03:50 PM
RE: 1946 Telechron 8H59 "Musalarm" - by morzh - 01-23-2026, 05:11 PM
RE: 1946 Telechron 8H59 "Musalarm" - by morzh - 02-01-2026, 07:22 PM
RE: 1946 Telechron 8H59 "Musalarm" - by MrFixr55 - 02-01-2026, 09:49 PM
RE: 1946 Telechron 8H59 "Musalarm" - by MrFixr55 - 02-01-2026, 10:05 PM
RE: 1946 Telechron 8H59 "Musalarm" - by morzh - 02-01-2026, 10:28 PM
RE: 1946 Telechron 8H59 "Musalarm" - by MrFixr55 - 02-01-2026, 10:48 PM
RE: 1946 Telechron 8H59 "Musalarm" - by morzh - 02-01-2026, 11:06 PM
RE: 1946 Telechron 8H59 "Musalarm" - by Arran - 02-02-2026, 03:01 AM
RE: 1946 Telechron 8H59 "Musalarm" - by Arran - 02-02-2026, 03:05 AM
RE: 1946 Telechron 8H59 "Musalarm" - by MrFixr55 - 02-02-2026, 04:55 PM
RE: 1946 Telechron 8H59 "Musalarm" - by MrFixr55 - 02-02-2026, 05:08 PM
RE: 1946 Telechron 8H59 "Musalarm" - by morzh - 02-02-2026, 05:19 PM
RE: 1946 Telechron 8H59 "Musalarm" - by Arran - 02-02-2026, 05:35 PM
RE: 1946 Telechron 8H59 "Musalarm" - by morzh - 02-02-2026, 05:52 PM
RE: 1946 Telechron 8H59 "Musalarm" - by MrFixr55 - 02-02-2026, 06:24 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated. By dconant. Dittos'Jimradio — 08:01 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind, even if it's a U.S.N power supply. I have a book somewhere abo...Arran — 02:56 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
hello david, I have a similar generator in my collection that features a cast iron, single-cylinder Briggs & Stratt...radiorich — 01:00 AM
under chassis parts locator diagram for 1938 Zenith 9s262
Has anyone gone to the trouble of creating an under chassis parts locator image?  Yes, I can identify components by foll...bobloney — 08:57 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Try looking at this site the book mark is for a old generator that I was given. David    https://radionerds.com/index.ph...David — 08:36 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Hello Everyone, I am looking for voltage identification for all the pin positions on the socket of a CRV-20130 power su...Tonym4704 — 08:16 PM
Philco P45-6365 Universal Transformer Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM
54C Complete Teardown/Rebuild
I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM
HiFi (Chifi) tube amp build - but my own design.
It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM
Philco 71 Code 125
Hello,  I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM

[-]
Who's Online
There are currently 2217 online users. [Complete List]
» 1 Member(s) | 2216 Guest(s)
Avatar

>