03-08-2026, 11:35 PM
Hello guys,
Here’s another issue to address before giving it back. In the photo below, you can see the large tuning pulley on the input of the variable tuning capacitor, which connects to a smaller drive gear that operates the tuning. The problem is that the small gear tends to come off the end of the shaft if you pull on it.
Sincerely Richard
Here’s another issue to address before giving it back. In the photo below, you can see the large tuning pulley on the input of the variable tuning capacitor, which connects to a smaller drive gear that operates the tuning. The problem is that the small gear tends to come off the end of the shaft if you pull on it.
Sincerely Richard
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
