04-02-2026, 01:55 PM
The items you show for 33 and 35 in mine are resistors. The yellowish one is a 490K resistor (32) and the mica mold is the 400 ohm resistor(29), that used to be a 700 ohm, but was changed in the service notes, that is shown piggybacking the .25 MFD cap in the component location/schematic. So it looks like your 125 might be missing 2 of the 110 pico caps too. The only one I dont have that your 125 has is the mica cap from the center tap of the volume control to ground…




