Beginning a 37-620 Restoration

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Linear Mode

SRv2
Member

Posts: 109
Threads: 15
Joined: Mar 2024
City: BERTHOUD State, Province, Country: CO

#53

04-12-2026, 09:26 PM

Roy,

There is a guy on eBay that sells lead sets that will work on the signal generator. You can make your own but his costs are so reasonable I went that route. You have to specify the connector type. If original connector on the IG-102, it is the switchcraft connector. He has one with capacitive coupling built in and one with RMA dummy antenna. Just one option to consider. Here are a couple links to review. Other folks here with more experience than me may have better recommendations.

https://ebay.us/m/Kv0W3k
https://ebay.us/m/8Af2LB

Hope this helps some. Also, I have had pretty good luck with test equipment off eBay. I know some folks don’t like eBay and I understand the pros/cons. But it’s an option. George

Craftsmanship is an ongoing cycle of learning fueled by patience, persistence, and care, where every project refines our judgment and challenges our skills, in the steady pursuit of the Path to Mastery.

Find

« Next Oldest | Next Newest »

Messages In This Thread

Beginning a 37-620 Restoration - by glyphmon - 03-28-2026, 01:58 AM

RE: Beginning a 37-620 Restoration - by morzh - 03-28-2026, 09:03 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 03-28-2026, 09:28 AM

RE: Beginning a 37-620 Restoration - by RodB - 03-28-2026, 11:23 AM

RE: Beginning a 37-620 Restoration - by morzh - 03-28-2026, 03:29 PM

RE: Beginning a 37-620 Restoration - by morzh - 03-28-2026, 03:47 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 03-29-2026, 12:23 AM

RE: Beginning a 37-620 Restoration - by morzh - 03-29-2026, 10:10 AM

RE: Beginning a 37-620 Restoration - by DaleHCook - 03-29-2026, 10:27 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 03-29-2026, 11:07 AM

RE: Beginning a 37-620 Restoration - by RodB - 03-29-2026, 11:07 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 03-29-2026, 11:23 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 03-29-2026, 12:03 PM

RE: Beginning a 37-620 Restoration - by morzh - 03-29-2026, 12:09 PM

RE: Beginning a 37-620 Restoration - by DaleHCook - 03-29-2026, 12:46 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 03-29-2026, 02:20 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 03-29-2026, 02:28 PM

RE: Beginning a 37-620 Restoration - by morzh - 03-29-2026, 03:01 PM

RE: Beginning a 37-620 Restoration - by RodB - 03-29-2026, 03:22 PM

RE: Beginning a 37-620 Restoration - by RodB - 03-29-2026, 04:09 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 03-29-2026, 04:52 PM

RE: Beginning a 37-620 Restoration - by Arran - 03-29-2026, 05:02 PM

RE: Beginning a 37-620 Restoration - by Arran - 03-29-2026, 07:44 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 03-29-2026, 08:02 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-07-2026, 10:55 AM

RE: Beginning a 37-620 Restoration - by RodB - 04-07-2026, 01:05 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-07-2026, 01:24 PM

RE: Beginning a 37-620 Restoration - by RodB - 04-07-2026, 02:19 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-07-2026, 03:18 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-07-2026, 03:30 PM

RE: Beginning a 37-620 Restoration - by RodB - 04-07-2026, 07:04 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-07-2026, 07:22 PM

RE: Beginning a 37-620 Restoration - by RodB - 04-07-2026, 07:53 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-07-2026, 10:02 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-07-2026, 10:20 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-08-2026, 12:13 AM

RE: Beginning a 37-620 Restoration - by morzh - 04-08-2026, 08:20 AM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 04-08-2026, 08:39 AM

RE: Beginning a 37-620 Restoration - by Arran - 04-08-2026, 01:13 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-11-2026, 05:40 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-11-2026, 07:52 PM

RE: Beginning a 37-620 Restoration - by SRv2 - 04-11-2026, 09:31 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-11-2026, 10:25 PM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 04-11-2026, 11:32 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-11-2026, 11:50 PM

RE: Beginning a 37-620 Restoration - by radiorich - 04-12-2026, 12:58 AM

462ron - by 462ron - 04-12-2026, 08:37 AM

RE: Beginning a 37-620 Restoration - by morzh - 04-12-2026, 10:44 AM

RE: Beginning a 37-620 Restoration - by RodB - 04-12-2026, 11:31 AM

RE: Beginning a 37-620 Restoration - by SRv2 - 04-12-2026, 06:26 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-12-2026, 07:51 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-12-2026, 09:10 PM

RE: Beginning a 37-620 Restoration - by SRv2 - 04-12-2026, 09:26 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-12-2026, 10:21 PM

RE: Beginning a 37-620 Restoration - by radiorich - 04-12-2026, 11:11 PM

462ron - by 462ron - 04-13-2026, 07:15 AM

RE: Beginning a 37-620 Restoration - by morzh - 04-13-2026, 07:58 AM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 04-13-2026, 09:22 AM

RE: Beginning a 37-620 Restoration - by RodB - 04-13-2026, 11:12 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-20-2026, 10:42 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-20-2026, 10:48 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-20-2026, 10:55 PM

RE: Beginning a 37-620 Restoration - by DaleHCook - 04-21-2026, 07:07 AM

RE: Beginning a 37-620 Restoration - by morzh - 04-21-2026, 08:09 AM

RE: Beginning a 37-620 Restoration - by morzh - 04-21-2026, 08:12 AM

RE: Beginning a 37-620 Restoration - by DaleHCook - 04-21-2026, 08:22 AM

RE: Beginning a 37-620 Restoration - by radiorich - 04-21-2026, 08:28 AM

RE: Beginning a 37-620 Restoration - by DaleHCook - 04-21-2026, 01:54 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-21-2026, 03:29 PM

RE: Beginning a 37-620 Restoration - by Joe Rossi - 04-21-2026, 03:45 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-21-2026, 04:47 PM

RE: Beginning a 37-620 Restoration - by RodB - 04-21-2026, 05:17 PM

RE: Beginning a 37-620 Restoration - by Arran - 04-21-2026, 05:44 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-21-2026, 06:40 PM

RE: Beginning a 37-620 Restoration - by RodB - 04-21-2026, 07:10 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-21-2026, 08:06 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-21-2026, 09:06 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-21-2026, 10:16 PM

462ron - by 462ron - 04-22-2026, 07:33 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 04-28-2026, 11:44 PM

RE: Beginning a 37-620 Restoration - by morzh - 04-29-2026, 08:04 AM

RE: Beginning a 37-620 Restoration - by DaleHCook - 04-29-2026, 08:35 AM

RE: Beginning a 37-620 Restoration - by RodB - 04-29-2026, 11:37 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 05-02-2026, 11:05 PM

RE: Beginning a 37-620 Restoration - by RodB - 05-03-2026, 09:22 AM

RE: Beginning a 37-620 Restoration - by morzh - 05-03-2026, 10:59 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 08-06-2026, 07:39 PM

RE: Beginning a 37-620 Restoration - by morzh - 08-07-2026, 01:40 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 08-07-2026, 05:21 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 09-10-2026, 08:15 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 09-13-2026, 02:26 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 09-23-2026, 09:05 PM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 09-24-2026, 02:19 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 09-24-2026, 10:01 AM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 09-25-2026, 10:45 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 09-25-2026, 11:50 AM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 09-25-2026, 05:44 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 09-25-2026, 11:14 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 10-03-2026, 09:54 PM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 10-03-2026, 10:31 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 10-03-2026, 10:39 PM

RE: Beginning a 37-620 Restoration - by radiorich - 10-03-2026, 11:59 PM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 10-04-2026, 08:34 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 10-04-2026, 10:20 AM

RE: Beginning a 37-620 Restoration - by radiorich - 10-04-2026, 11:59 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 10-04-2026, 12:51 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 10-04-2026, 07:47 PM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 10-04-2026, 08:49 PM

RE: Beginning a 37-620 Restoration - by radiorich - 10-04-2026, 09:12 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 10-04-2026, 10:14 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 10-05-2026, 10:05 PM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 10-05-2026, 10:20 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 10-05-2026, 10:42 PM

RE: Beginning a 37-620 Restoration - by radiorich - 10-06-2026, 12:16 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 10-06-2026, 12:59 AM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 10-06-2026, 07:50 AM

462ron - by 462ron - 10-06-2026, 08:12 AM

RE: Beginning a 37-620 Restoration - by MrFixr55 - 10-06-2026, 08:15 AM

RE: Beginning a 37-620 Restoration - by glyphmon - 10-07-2026, 03:55 PM

RE: Beginning a 37-620 Restoration - by glyphmon - 10-10-2026, 03:47 PM

View a Printable Version

Users browsing this thread: 2 Guest(s)

Recent Posts
Philco P45-6365 Universal Transformer Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM
54C Complete Teardown/Rebuild
I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM
HiFi (Chifi) tube amp build - but my own design.
It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM
Philco 71 Code 125
Hello, I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated.dconant — 07:57 AM
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting. IF alignment went great, almost all was already spot-on. Adjusting on th...glyphmon — 11:35 PM

Who's Online

There are currently 1877 online users. [Complete List]
» 1 Member(s) | 1876 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me