[Joe Rossi]

Good Evening.  The 49-602 is now off life support and working on its' own.  I fear that I've become no better than a parts replacer, and a not very good one at that. I failed to replace R207 and I put a wire in its place .  I also failed to put a jumper connection in place.  I possess the schematic, but didn't trace the circuits properly to insure that everything was as it should be.  Well, the voltages are as follows:

C101A s/b 120V, measues 111V.  OK
C101B s/b 65V, measures 58V  OK
7.5V between Pin 7 of 3V4 and Pin 1 of the 1R5, measures 5.7V.  Low, but OK
I also measured the voltage after R102.  The schematic says it should be 90V, it measures 88V.

It plays rather well.  I will Keep it playing for many hours over the next few days.  After that I will use the battery eliminator to see how it performs that way.  If it does, I will build a battery to fit in the compartment.

Thank you gentlemen and appreciate your assistance.  I hope that I will be more diligent on my next radio.  Joe