[Joe Rossi]

Mr. Fixr,  The schematic doesn't show a "jumper", but on Section 2 of the schematic, it is where C201, C204, C206, the black wire from Z301, R201, and R206 all connect to Pin 1 of the 1U5.  There is a  6-lug terminal strip where lugs 3 & 4 should come together. One lug alone woud make a very sloppy connection indeed. I now recall cleaning both lugs and reattaching them in a cleaner fashion.  I forgot about the jumper.  I'm puzzled about the low A+.  When calculating for the resistor drop of the 1N5408, I used:

R=drop/IDC = 10V /0.063A = 159 ohms.

The closest I could come up with was 135 ohms at 2W.

I will ponder this and maybe look for 150-160 ohms at 2W, but for now the unit plays nicely.

Thanks to all,  Joe