Philco 38-7 CS restoration

Thread Rating:

1 Vote(s) - 5 Average
1
2
3
4
5

Linear Mode

Philco 38-7 CS restoration

codefox1
Silent Key

Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY

#27

09-25-2011, 10:05 AM

Beautiful work. Don't know about the chassis, if you have a good set of metal tubes, and they are correct, you could carefully drill out the rivets and lose the tube shield bases. Then make sure that pin 1 of each is not used as a tie point for something else and then ground it. Double check to see if there are any exceptions, I can't think of any offhand.

Find

« Next Oldest | Next Newest »

Messages In This Thread

Philco 38-7 CS restoration - by Bob Andersen - 08-24-2011, 07:02 PM

RE: Philco 38-7 CS restoration - by Rubrburnr - 01-01-2013, 09:16 PM

RE: Philco 38-7 CS restoration - by Bob Andersen - 01-01-2013, 09:33 PM

RE: Philco 38-7 CS restoration - by Rubrburnr - 01-01-2013, 09:54 PM

RE: Philco 38-7 CS restoration - by Bob Andersen - 01-02-2013, 09:29 PM

RE: Philco 38-7 CS restoration - by TA Forbes - 01-02-2013, 10:40 PM

RE: Philco 38-7 CS restoration - by Bob Andersen - 08-01-2014, 11:43 PM

RE: Philco 38-7 CS restoration - by klondike98 - 08-02-2014, 09:39 AM

RE: Philco 38-7 CS restoration - by PhilcoJohn - 08-03-2014, 08:32 AM

RE: Philco 38-7 CS restoration - by Bob Andersen - 08-03-2014, 02:28 PM

RE: Philco 38-7 CS restoration - by Geoff - 08-09-2014, 12:34 AM

RE: Philco 38-7 CS restoration - by Bob Andersen - 10-17-2014, 12:11 PM

RE: Philco 38-7 CS restoration - by Bob Andersen - 10-17-2014, 12:14 PM

RE: Philco 38-7 CS restoration - by Eliot Ness - 10-17-2014, 12:21 PM

RE: Philco 38-7 CS restoration - by morzh - 10-17-2014, 04:02 PM

RE: Philco 38-7 CS restoration - by PhilcoJohn - 10-22-2014, 09:48 AM

Re: Philco 38-7 CS restoration - by Bob Andersen - 08-24-2011, 07:07 PM

Re: Philco 38-7 CS restoration - by TA Forbes - 08-24-2011, 09:38 PM

Re: Philco 38-7 CS restoration - by Bob Andersen - 08-24-2011, 10:15 PM

Re: Philco 38-7 CS restoration - by Arran - 08-25-2011, 10:36 PM

Re: Philco 38-7 CS restoration - by Bob Andersen - 08-26-2011, 02:01 AM

Re: Philco 38-7 CS restoration - by Arran - 08-27-2011, 01:10 AM

Re: Philco 38-7 CS restoration - by TA Forbes - 08-27-2011, 03:49 PM

Re: Philco 38-7 CS restoration - by Ron Ramirez - 08-27-2011, 04:13 PM

Re: Philco 38-7 CS restoration - by Arran - 08-28-2011, 12:54 AM

Re: Philco 38-7 CS restoration - by Bob Andersen - 08-28-2011, 01:35 PM

Re: Philco 38-7 CS restoration - by codefox1 - 08-28-2011, 02:30 PM

Re: Philco 38-7 CS restoration - by Bob Andersen - 09-06-2011, 11:20 PM

Re: Philco 38-7 CS restoration - by Ron Ramirez - 09-11-2011, 10:35 AM

Re: Philco 38-7 CS restoration - by Steve Davis - 09-11-2011, 11:17 AM

Re: Philco 38-7 CS restoration - by Arran - 09-11-2011, 07:38 PM

Re: Philco 38-7 CS restoration - by Bob Andersen - 09-12-2011, 12:20 AM

Re: Philco 38-7 CS restoration - by Bob Andersen - 09-14-2011, 09:09 PM

Re: Philco 38-7 CS restoration - by TA Forbes - 09-14-2011, 10:28 PM

Re: Philco 38-7 CS restoration - by Bob Andersen - 09-15-2011, 03:03 AM

Re: Philco 38-7 CS restoration - by TA Forbes - 09-15-2011, 10:33 PM

Re: Philco 38-7 CS restoration - by Bob Andersen - 09-15-2011, 10:56 PM

Re: Philco 38-7 CS restoration - by Bob Andersen - 09-23-2011, 05:47 PM

Re: Philco 38-7 CS restoration - by TA Forbes - 09-23-2011, 10:06 PM

Re: Philco 38-7 CS restoration - by Bob Andersen - 09-24-2011, 12:34 AM

Re: Philco 38-7 CS restoration - by TA Forbes - 09-24-2011, 10:37 PM

Re: Philco 38-7 CS restoration - by codefox1 - 09-25-2011, 10:05 AM

Re: Philco 38-7 CS restoration - by Bob Andersen - 09-26-2011, 02:02 AM

Re: Philco 38-7 CS restoration - by Bob Andersen - 09-27-2011, 01:42 AM

Re: Philco 38-7 CS restoration - by Bob Andersen - 10-03-2011, 12:28 AM

Re: Philco 38-7 CS restoration - by Bob Andersen - 10-04-2011, 06:51 PM

Re: Philco 38-7 CS restoration - by ipwizard - 10-05-2011, 04:11 PM

Re: Philco 38-7 CS restoration - by TA Forbes - 10-05-2011, 11:02 PM

Re: Philco 38-7 CS restoration - by Bob Andersen - 10-09-2011, 11:58 PM

Re: Philco 38-7 CS restoration - by Bob Andersen - 10-12-2011, 12:55 AM

Re: Philco 38-7 CS restoration - by Ron Ramirez - 10-12-2011, 05:18 AM

Re: Philco 38-7 CS restoration - by Arran - 10-17-2011, 12:11 AM

Re: Philco 38-7 CS restoration - by Bob Andersen - 10-17-2011, 04:31 PM

Re: Philco 38-7 CS restoration - by Arran - 10-18-2011, 01:47 AM

View a Printable Version

Users browsing this thread: 9 Guest(s)

Recent Posts
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit. That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM

Who's Online

There are currently 4206 online users. [Complete List]
» 1 Member(s) | 4205 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me