Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x


Restoring a 37-116
#12

MrFixr, when I went many years ago to pick up my 37-116, I had no option of whether or not to plug it in and test it. As I got out of my suv I could hear the hum loud and clear coming from the radio as the guy had it turned on and sitting on his deck. I cringed when hearing that but luckily nothing burned out. It’s amazing that nothing happened because under the chassis there were signs that someone was rewiring things because wires were hanging along with some electrolytics had leads just wrapped around other components and not even soldered, just swinging in the breeze! It’s been probably over 10 years since I restored the chassis but recently the magnetic tuning (afc) developed a problem where when turned on it detunes the oscillator quite a bit but when off it plays normally. Since I don’t really need it I just leave it off. If I ever need to pull the chassis in the future for any serious fault I will delve into the afc problem at that time. I only refinished the cabinet 2 years ago and have it playing in our living room. Looking forward to your restoration progress.

Ron

Bendix 0626.      RCA T64  Philco 20B
Philco 41-250.    Philco49-500
GE 201.             Philco 39-25
Motorola 61X13. Philco 46-420     Crosley 52TQ
Philco 37-116.    Philco 70
AK 35                Philco 46-350
Philco 620B.       Zenith Transoceanic B-600
Philco 60B.         Majestic 50
Philco 52-944.    AK 84 


Messages In This Thread
Restoring a 37-116 - by MrFixr55 - 07-01-2026, 12:39 PM
RE: Restoring a 37-116 - by jrblasde - 07-01-2026, 03:13 PM
RE: Restoring a 37-116 - by morzh - 07-01-2026, 03:35 PM
RE: Restoring a 37-116 - by jrblasde - 07-01-2026, 04:09 PM
RE: Restoring a 37-116 - by morzh - 07-01-2026, 05:07 PM
RE: Restoring a 37-116 - by Arran - 07-01-2026, 05:32 PM
RE: Restoring a 37-116 - by radiorich - 07-01-2026, 11:50 PM
RE: Restoring a 37-116 - by MrFixr55 - 07-11-2026, 09:19 PM
RE: Restoring a 37-116 - by dconant - 07-12-2026, 10:07 AM
RE: Restoring a 37-116 - by jrblasde - 07-12-2026, 10:36 AM
RE: Restoring a 37-116 - by MrFixr55 - 07-25-2026, 08:42 AM
462ron - by 462ron - 07-26-2026, 07:48 AM
RE: Restoring a 37-116 - by dconant - 07-26-2026, 08:00 AM
462ron - by 462ron - 07-26-2026, 08:38 AM
RE: Restoring a 37-116 - by MrFixr55 - 08-17-2026, 01:46 PM
462ron - by 462ron - 08-18-2026, 07:37 AM
RE: Restoring a 37-116 - by dconant - 08-18-2026, 08:14 AM
RE: Restoring a 37-116 - by MrFixr55 - 08-18-2026, 08:29 AM
RE: Restoring a 37-116 - by RodB - 08-18-2026, 10:18 AM
RE: Restoring a 37-116 - by MrFixr55 - 08-18-2026, 11:27 AM
RE: Restoring a 37-116 - by Arran - 08-18-2026, 01:55 PM
RE: Restoring a 37-116 - by Arran - 08-18-2026, 02:06 PM
RE: Restoring a 37-116 - by klondike98 - 08-19-2026, 07:49 PM
462ron - by 462ron - 08-20-2026, 07:21 AM
RE: Restoring a 37-116 - by MrFixr55 - 08-21-2026, 08:39 AM
RE: Restoring a 37-116 - by MrFixr55 - 08-21-2026, 08:43 AM
462ron - by 462ron - 08-21-2026, 10:30 AM
RE: Restoring a 37-116 - by morzh - 09-05-2026, 02:55 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM
My Atwater Kent 84
Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
The engine is a B&S 23 inch cast Iron holds 2 quarts of oil. The Generator is a 4 pole 1800 rpm mine was made in 195...David — 10:51 AM
Philco 45-6365 Universal IFT Instruction Manual
Dale: Modified topic as suggested. It is not for a specific project. I found it in a box of stuff I recently purchased...GRG — 10:34 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind ... That is a MIL-5015 style connector, used in a wide v...DaleHCook — 10:19 AM
Philco P45-6365 Universal Transformer Instruction Manual
I would suggest changing the topic from "P45-6365 Universal Transformer" to "45-6365 Universal IFT."...DaleHCook — 10:08 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated. By dconant. Dittos'Jimradio — 08:01 AM

[-]
Who's Online
There are currently no members online.

>