[HarryWeatherford]

As it turned out, I needed to use Left and Right with 220 ohm resistors, tied together and then going through a 1 uF cap.  I used a 0.01uF cap across the "phono" input and chassis ground.  That works pretty good.  Now I can play Alexa through the phono input and out of the newly repaired system.  I can also control the volume through my cell phone.   I also reworked the cabinet.   It was absolutely terrible shape - it had been left in a barn for many years.  I installed new antique cloth behind the wood grid.  Behind the cloth, I installed light bars that run off the speaker volume.  I can turn these lights on/off with a small remote.  So now, AM , SW and phono input all work (after the alignment).  Now my kids want me to rebuild them so I have two more in the garage (46-480 and 46-1226 code 122)