08-16-2026, 08:18 PM
jrblasde: Your schematics are great! What did you use to generate the schematics? For my transformer, the winding DC resistance was about 100 ohms to the center tap (200 ohms total). That is because they installed the same transformer model number that was installed in the 46-1226 Code 125. (They were the same transformer) The 480 didn't need the blue set of secondary windings, so they were cut and taped-up.
Arran: I think the code for this 46-480 is 121 but from the picture, the corner of the tag is missing. Is there anyway to determine the 'run' number or to get any information from the pictures I've attached? That may help clarify the plate load resistor that I need.
I really appreciate the feedback.
Arran: I think the code for this 46-480 is 121 but from the picture, the corner of the tag is missing. Is there anyway to determine the 'run' number or to get any information from the pictures I've attached? That may help clarify the plate load resistor that I need.
I really appreciate the feedback.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
