08-25-2026, 08:29 AM
Hmmm...
The boost voltage on this set may be quite high. Is it listed on the schematic? If it is as high as 600V, either try to get a 1KV cap or consider putting two 0.068 uF caps in series. These may have to be bridged with resistors to ensure equal voltage distribution. The picture of the schematic in your post does not show that section of the schematic, it shows the tuner input to the video stage.
Hope this helps!
The boost voltage on this set may be quite high. Is it listed on the schematic? If it is as high as 600V, either try to get a 1KV cap or consider putting two 0.068 uF caps in series. These may have to be bridged with resistors to ensure equal voltage distribution. The picture of the schematic in your post does not show that section of the schematic, it shows the tuner input to the video stage.
Hope this helps!
"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis
Best Regards,
MrFixr55
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
