[bsost]

Mr Fixr55 wrote:
"Hi bsost,

First off, Welcome to the Philco Phorum!! We are glad to have you. We are a "family friendly

Refer to the following link to the schematic and repair instructions for this set:....."

Thank you so much for this info, EXACTLY what I was needing. I have tried loosening the band switch (I didn't know the name - thank you). I just don't see how to do that. I have seen others here that have completely stripped the chassis. I would prefer not to do that. As for the electrolytics under the metal containers. Any thoughts on whether to rebuild new inside or underneath with new? Thanks again for the details in your post. Will add to my library for this project!