[Mr. Radio-Man]

Ok, after doing a little bit research on the new OPT I seem to have it all situated.

So the Red wire connects to pin 4 of the 6F6 tube and the Blue wire connects to pin 3 of the 6F6 tube.

On the other end I will connect the Green wire to the small Red wire that is coming from the speaker cone to the old OPT
and the Black wire will connect to the small Blue wire that is going from the OPT to the Speaker coil (Hum-Buckling thing)

The Brown and Yellow wires I will not use.

I think that is everything, please tell me if any of that was wrong before I do it all...

Mr. Radio-Man