Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Sharing my basket case project for the Winter (or earlier).
#1

Hi all,

First off, I'd like to say it is great to see you back Ron Icon_smile

I thought some of you'd like to see my latest basket case set.
A Philco model 60. As you can see the cabinet is badly deteriorated with insects, or termites from years ago. I bid a generous $5 for it at auction and won. no competition Icon_smile

I posted some pics on the ARF already of this,(along with a little of my philosophy on this) but wanted to share with the Phorum here too.

I know that this may not be worth that much when done, but there are other reasons than monetary value for taking on a job like this. First it is a challenge, thinking of ways to save this or that, and if that fails make a new part. And if this cabinet is trashed, that is one less in the world that exists.

At last Saturday's auction, I met the granddaughter (in her early 70's) of the original owner and when this is done, I will let he se the finished set. Maybe a picture of here next to it. She was happy that someone would actually try and save the set, as it had given her many memories thru the years.

Anyway, I will keep a photo log of the progress and share at a later time.
I do know the transformer is good, and the speaker cone needs slight repair. Chassis should be no problem.
Cabinet, I will try to reuse the original veneer from the top. Almost all of the inner layer of the top had been eaten away, but no damage to the outer thin layer. We will see how it goes. The front, and the base are in pretty good condition considering.
Take care ,
Gary.
[Image: http://www.grabbittradios.com/philco60/philco1.jpg]

[Image: http://www.grabbittradios.com/philco60/philco2.jpg]


[Image: http://www.grabbittradios.com/philco60/philco7.jpg]

[Image: http://www.grabbittradios.com/philco60/philco11.jpg]
[Image: http://www.grabbittradios.com/philco60/philco13.jpg]
[Image: http://www.grabbittradios.com/philco60/philco16.jpg]


Messages In This Thread
Sharing my basket case project for the Winter (or earlier). - by gary rabbitt - 09-28-2006, 08:41 PM
[No subject] - by Terry Judkins - 09-28-2006, 09:54 PM
[No subject] - by Drew - 09-30-2006, 06:55 AM
[No subject] - by Ron Ramirez - 09-30-2006, 08:56 AM
[No subject] - by gary rabbitt - 09-30-2006, 08:29 PM
[No subject] - by Ron Ramirez - 10-04-2006, 09:04 AM
[No subject] - by Poston Drake - 10-19-2006, 06:28 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently no members online.

>