11-25-2011, 07:38 PM
The oscitator coil 05985(3)has 3 set of windings.Inner tube/coil and outer tube/coil plus the one in trouble over the outer coil.The one in trouble you suggested for kathode circuit I trased and repaired/rewinded succesfully-was reading too high @100 ohms. 25 turns,38awg wire on stip of poly.scotch tape.Before did this surgery I noted this sceme on paper.Cleaned the base coil and lackered with polycoat spray.After rewinding it is reading 5.5 ohms.Riders wiring states 3.5 ohms.Is that ok?Btw: From Kathode of 36 tube to lug #1 via new coil,out on lug#2(clockwise counting) via 10k resistor bypas with 700 mmf-mica cap to ground.
Got to do more tracing on the other winding of same coil.Still bit puzling!?
Thank you so far!
Got to do more tracing on the other winding of same coil.Still bit puzling!?
Thank you so far!