Phun With Philco 80

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Phun With Philco 80

LASJayhawk
Senior Member

Posts: 289
Threads: 40
Joined: Oct 2011
City: Las Vegas, NV

12-16-2011, 07:37 PM

IT'S ALIVE!!!! sort of. Icon_smile

Replaced the 9K 10K and 1M resistors all were way out of tolerance.
didn't work.

Changed all the caps in the block caps.
didn't work.

played with the regen adjustment and got a few birdies but didn't work.

So in a hail mary move, I swapped the weak 36's.... jackpot!!
It's nowhere near right, and has almost no volume but is gettting about 10 stations on a 6' antenna.

I'll get some new 36's and a 42 then go from there.

John
Las Vegas, NV USA

Find

« Next Oldest | Next Newest »

Messages In This Thread

Phun With Philco 80 - by LASJayhawk - 12-16-2011, 01:44 AM

Re: Phun With Philco 80 - by BDM - 12-16-2011, 02:41 PM

Re: Phun With Philco 80 - by 7estatdef - 12-16-2011, 05:22 PM

Re: Phun With Philco 80 - by LASJayhawk - 12-16-2011, 07:37 PM

Re: Phun With Philco 80 - by Texasrocker - 12-16-2011, 11:25 PM

Re: Phun With Philco 80 - by LASJayhawk - 12-17-2011, 01:05 AM

Re: Phun With Philco 80 - by 7estatdef - 01-09-2012, 09:58 AM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM

Who's Online

There are currently 6352 online users. [Complete List]
» 2 Member(s) | 6350 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me