Set screw removal

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Set screw removal

ipwizard
Senior Member

Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek State, Province, Country: Ohio

02-14-2012, 04:44 PM

I also use needle nose pliers on these.

Looks like station/light selector on a Mystery control set (39-116/55). If it is ohh what fun those are to work on with all that rotten rubber wiring. Icon_smile

-Keith

Find

« Next Oldest | Next Newest »

Messages In This Thread

Set screw removal - by billp - 02-12-2012, 04:04 PM

Re: Set screw removal - by Ron Ramirez - 02-12-2012, 07:32 PM

Re: Set screw removal - by codefox1 - 02-13-2012, 04:28 PM

Re: Set screw removal - by Dave - 02-13-2012, 10:11 PM

Re: Set screw removal - by ipwizard - 02-14-2012, 04:44 PM

Re: Set screw removal - by billp - 02-14-2012, 05:26 PM

Re: Set screw removal - by LASJayhawk - 02-14-2012, 07:32 PM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM

Who's Online

There are currently 6991 online users. [Complete List]
» 1 Member(s) | 6990 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me