03-17-2012, 04:22 PM
For clarity, here is a close-up of the other side of the chassis:
[Image: http://www.philcoradio.com/images/phorum...e00008.jpg]
Yes, the extra switch next to the stepper unit switch contacts is a relay driven switch, which switches the receiver from radio to phonograph mode and back again. I sure hope there is nothing wrong with this relay and switch.
You'll also notice mine has an extra tube socket - that is for a 7C6, used as a phono preamp.
In the photo above, I have removed the shield (which mounted at upper left) which covers the spark filter coil and associated circuitry. You'll also see more of those Cornell Dubilier Cubs in this photo. You can also see that the restoration work has begun - one cap and one resistor have been replaced, and four short wires have been resleeved.
[Image: http://www.philcoradio.com/images/phorum...e00008.jpg]
Yes, the extra switch next to the stepper unit switch contacts is a relay driven switch, which switches the receiver from radio to phonograph mode and back again. I sure hope there is nothing wrong with this relay and switch.
You'll also notice mine has an extra tube socket - that is for a 7C6, used as a phono preamp.
In the photo above, I have removed the shield (which mounted at upper left) which covers the spark filter coil and associated circuitry. You'll also see more of those Cornell Dubilier Cubs in this photo. You can also see that the restoration work has begun - one cap and one resistor have been replaced, and four short wires have been resleeved.
--
Ron Ramirez
Ferdinand IN
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
